Availability: | |
---|---|
Quantity: | |
CY
Hylein
High Efficiency Permanent Magnet Variable Frequency Screw Air Compressor Cy Series 7.5kw 11kw 15kw 22kw 30kw 37kw 45kw 55kw 75kw
Basic Info
Lubrication Style | Lubricated | Cooling System | Oil Cooling | Power Source | AC Power |
Installation Type | Stationary Type | Model NO. | CY | Type | Single Screw Compressor |
Specification | 7.5kw 11kw 15kw 22kw 37kw 55kw 75Kw | Trademark | Hylein | Origin | China |
HS Code | 8414809090 | Production Capacity | 20, 000 Pieces/Year |
Product Description
CY Series Parameter Table | |||||
Model | C15Y | C22Y | C37Y | C55Y | C75Y |
Rate Power | 15kW | 22kW | 37kW | 55kW | 75kW |
F.A.D | 2.6m3/min | 3.6m3/min | 6.5m3/min | 10.0m3/min | 12.5m3/min |
Pressure | 0.8MPa | ||||
Drive Type | PM Motor/Direct-driven | ||||
Voltage /Frequency | AC380V-50Hz | ||||
Starting Mode | Variable Frequency | ||||
Connection | G1'' | G1'' | G1-1/2'' | G2'' | G2'' |
Size (LxWxH) | 1050X600X1125mm | 1050X600 X1125mm | 1200X650 X1500mm | 1580X1160 X1600mm | 1580X1160 X1600mm |
Weight | 280kg | 295kg | 425kg | 860kg | 930kg |
Comparison between permanent magnet motor and ordinary asynchronous motor
Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Component Details
Classic air-cooled main engine
●IE4 High efficiency motor
●140℃ without losing magnetism
●IP23 and IP54 protection levels are optional, which is better according to the environment
●Wide speed range and torque for more broadband Settings
New oil-cooled main engine
● IE5 super efficient oil cooled motor
180℃ without losing magnetism
● Ip65 protection grade, suitable for all-weather conditions
● There is no cooling blade required by the air-cooled motor, and the wind resistance energy consumption is "0".
● At low speed, the motor cooling is constant, higher reliability and longer life
● The motor shell is wrapped by oil circuit, low noise
● A 37kW air compressor, if the load rate is 60%, means that 40% of the time is running in no-load, and the energy consumption of 21.3kW (full load 42.55/2) is wasted, if the air compressor is used for 6000 hours in a year, then 2400 hours is wasted with 21.3kW energy consumption.
● According to 6000 hours per year, it is estimated that 60% is the load state, and the annual power consumption is 153,180KWH, but in actual operation, 40% is no-load, and the power consumption is 21.3kW when no-load, that is, the waste electricity bill is 6000hx40%x22kW=51120kwh, the air compressor generally will not work under full load. The average load rate of industry statistics is 60% (industry data, actual savings are determined by customer conditions). When no-load occurs, the motor must continue to run no-load, resulting in waste.
Conventional oil-cooled motors
Oil channel end face welding, trachoma, deformation, there is a risk of oil leakage;
The oil passage is small, it is reciprocating, and the pressure difference is large;
The orthomorphic oil channel, in the corner of the dead corner, the oil can not flow, forming a local hot spot;
The oil passage is internal and cannot be serviced or repaired.
New oil-cooled motor
Mold forming, no welding points, zero risk;
Rotary oil passage circulation, small pressure difference. It's a circular surface;
Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.
Frequency conversion technology
Average energy savings of 35% in fluctuating production demand with a wide range of adjustments;
It does not waste gas during idle time and will not be discouraged during normal operation;
The air compressor can be started or stopped under the whole system pressure, and there is no need to install an additional frequency converter;
Reduce the impact on the grid during start-up;
Reduce system leakage due to lower system pressure;
Perfect combination of air compressor and inverter.
Application
Used in many fields, industries
CNC Industry | ||
Printing Industry | ||
Electron Industry | ||
Food Industry | ||
Blister industry |
After-sales Service
Equipment support High efficiency and energy saving equipment since the start of normal commissioning, to ensure the normal operation of the equipment.
Service scheme Monthly, quarterly regular arrangement of personnel to the user phone or on-site equipment operation inspection, testing work, timely understanding of unit operation dynamics, effective answer to user equipment operation questions, and do the corresponding need to improve maintenance, maintenance, to ensure the long-term effective work of the equipment, while providing service reports every time.
We have a solid theoretical knowledge, practical ability of strong service team and high-quality management team.
Our company will provide the fastest solution after receiving the notification of the failure of the user's equipment, and arrange technicians to arrive at the scene as soon as necessary.
Warranty commitment High efficiency and energy saving equipment since the start of normal commissioning, the whole machine warranty for one year.
FAQ
Q1: What's your delivery time?
A: It takes about 15 days, if there is any urgent order, please contact us.
Q2: How long is your air compressor warranty?
A: One year for the whole machine when the compressor leave our factory.
Q3: How about your after-sales service?
A:1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
High Efficiency Permanent Magnet Variable Frequency Screw Air Compressor Cy Series 7.5kw 11kw 15kw 22kw 30kw 37kw 45kw 55kw 75kw
Basic Info
Lubrication Style | Lubricated | Cooling System | Oil Cooling | Power Source | AC Power |
Installation Type | Stationary Type | Model NO. | CY | Type | Single Screw Compressor |
Specification | 7.5kw 11kw 15kw 22kw 37kw 55kw 75Kw | Trademark | Hylein | Origin | China |
HS Code | 8414809090 | Production Capacity | 20, 000 Pieces/Year |
Product Description
CY Series Parameter Table | |||||
Model | C15Y | C22Y | C37Y | C55Y | C75Y |
Rate Power | 15kW | 22kW | 37kW | 55kW | 75kW |
F.A.D | 2.6m3/min | 3.6m3/min | 6.5m3/min | 10.0m3/min | 12.5m3/min |
Pressure | 0.8MPa | ||||
Drive Type | PM Motor/Direct-driven | ||||
Voltage /Frequency | AC380V-50Hz | ||||
Starting Mode | Variable Frequency | ||||
Connection | G1'' | G1'' | G1-1/2'' | G2'' | G2'' |
Size (LxWxH) | 1050X600X1125mm | 1050X600 X1125mm | 1200X650 X1500mm | 1580X1160 X1600mm | 1580X1160 X1600mm |
Weight | 280kg | 295kg | 425kg | 860kg | 930kg |
Comparison between permanent magnet motor and ordinary asynchronous motor
Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Component Details
Classic air-cooled main engine
●IE4 High efficiency motor
●140℃ without losing magnetism
●IP23 and IP54 protection levels are optional, which is better according to the environment
●Wide speed range and torque for more broadband Settings
New oil-cooled main engine
● IE5 super efficient oil cooled motor
180℃ without losing magnetism
● Ip65 protection grade, suitable for all-weather conditions
● There is no cooling blade required by the air-cooled motor, and the wind resistance energy consumption is "0".
● At low speed, the motor cooling is constant, higher reliability and longer life
● The motor shell is wrapped by oil circuit, low noise
● A 37kW air compressor, if the load rate is 60%, means that 40% of the time is running in no-load, and the energy consumption of 21.3kW (full load 42.55/2) is wasted, if the air compressor is used for 6000 hours in a year, then 2400 hours is wasted with 21.3kW energy consumption.
● According to 6000 hours per year, it is estimated that 60% is the load state, and the annual power consumption is 153,180KWH, but in actual operation, 40% is no-load, and the power consumption is 21.3kW when no-load, that is, the waste electricity bill is 6000hx40%x22kW=51120kwh, the air compressor generally will not work under full load. The average load rate of industry statistics is 60% (industry data, actual savings are determined by customer conditions). When no-load occurs, the motor must continue to run no-load, resulting in waste.
Conventional oil-cooled motors
Oil channel end face welding, trachoma, deformation, there is a risk of oil leakage;
The oil passage is small, it is reciprocating, and the pressure difference is large;
The orthomorphic oil channel, in the corner of the dead corner, the oil can not flow, forming a local hot spot;
The oil passage is internal and cannot be serviced or repaired.
New oil-cooled motor
Mold forming, no welding points, zero risk;
Rotary oil passage circulation, small pressure difference. It's a circular surface;
Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.
Frequency conversion technology
Average energy savings of 35% in fluctuating production demand with a wide range of adjustments;
It does not waste gas during idle time and will not be discouraged during normal operation;
The air compressor can be started or stopped under the whole system pressure, and there is no need to install an additional frequency converter;
Reduce the impact on the grid during start-up;
Reduce system leakage due to lower system pressure;
Perfect combination of air compressor and inverter.
Application
Used in many fields, industries
CNC Industry | ||
Printing Industry | ||
Electron Industry | ||
Food Industry | ||
Blister industry |
After-sales Service
Equipment support High efficiency and energy saving equipment since the start of normal commissioning, to ensure the normal operation of the equipment.
Service scheme Monthly, quarterly regular arrangement of personnel to the user phone or on-site equipment operation inspection, testing work, timely understanding of unit operation dynamics, effective answer to user equipment operation questions, and do the corresponding need to improve maintenance, maintenance, to ensure the long-term effective work of the equipment, while providing service reports every time.
We have a solid theoretical knowledge, practical ability of strong service team and high-quality management team.
Our company will provide the fastest solution after receiving the notification of the failure of the user's equipment, and arrange technicians to arrive at the scene as soon as necessary.
Warranty commitment High efficiency and energy saving equipment since the start of normal commissioning, the whole machine warranty for one year.
FAQ
Q1: What's your delivery time?
A: It takes about 15 days, if there is any urgent order, please contact us.
Q2: How long is your air compressor warranty?
A: One year for the whole machine when the compressor leave our factory.
Q3: How about your after-sales service?
A:1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.